Canoe Motor Mount

Product Description

Ash canoe motor mount

This reinforced ash motor mount clamps to gunwales with easy to use phenolic knobs and stainless hardware. Made exclusively for electric trolling motors.

The position of the clamps can be adjusted from 370 to 480 mm, allowing the motor mount to be positioned where it fits best on your canoe. This is measured between the outside ends of the clamps, so to check the fit you should measure the hull width below the gunwales.

Heavy duty canoe motor mount

A heavy-duty aluminium mount with a maple clamping block for a petrol or electric motor. Not recommended for motors over 4 HP.

The position of the clamps can be adjusted from 365 to 490 mm, allowing the motor mount to be positioned where it fits best on your canoe. This is measured between the outside ends of the clamps, so to check the fit you should measure the hull width below the gunwales.